Currently, over fifteen series of products have been released on the market, which have covered the basic requirements of automatic deburring for most mechanical parts, of which several series of machines have progressive advancements in mechanization and automation.
Fifteen Major Series of Products
1. T Series Multi-Station Deburring Machines.
The T Series is a fully-automatic multi-station set of deburring machines which adopt dry brushers to deburr. In addition, it adopts PLC to control the equipment. Overall working process is fully automated. The technological parameters of the hairbrush, such as working deflection angle, rotation speed, direction, and so on, can be programmed; the hairbrush compensates automatically. The technical parameters of each station are controlled independently. The stations adopt a slewing system. Auto-rotation of the parts and rotation of the turntable are controlled by different motors and can be linked with clamps. Overall protection and fault self-diagnosis of the equipment complies with European standards. The T Series has high working efficiency, low fault rate, good flexibility, and can implement efficient operation of products. The electric circuits, air and oil pipes are arranged in a crisscross pattern. Although the structure of the equipment is complex, the T series multi-station deburring machine is the 3rd generation after continuous optimization and improvement by Promax; its mechanical and electrical structures and components are maturing and perfecting. Thus, it is a high performance to price ratio machine capable of replacing imported equipment. Six-station or four-station machines are available according to user’s requirements; the power heads can move either by stepping motion, or by compound motion according to the shape of the part.
2. The PT Series Double-Surface Deburring Machines with Automatic Surface Turning.
These series of machines are especially designed and developed for parts where burrs are formed along the edges after double surface milling and/or grinding; they can automatically remove the burrs on both surfaces of the part. There are two types of machines: the universal type and the high-end type. The universal machine contains a wide conveying belt, so multiple different sized parts can be deburred at the same time. As our company’s original product, in comparison with similar foreign equipment, the Universal PT series double-surface deburring machines have the following advantages:
I. High Efficiency
Multiple rows of parts with different size can be processed at the same time, while the foreign equipment can only allow parts entering in one single row.
II. Economically Efficient
The selling price of this equipment is only a fraction of that of similar foreign equipment, due to simple structuring and low maintenance costs and more.
III. Unique Technology
The machines utilize unique adsorption technology while turning multiple rows of parts so that the efficiency is higher, the equipment is more stable, and the application range is wider.
IV. Unique Anti-Tipping Technology
Stabilization technology allows the parts to stand stable and smoothly enter or exit the deburring machine during the deburring and turning processes. This makes it possible to automatically deburr the double surfaces for thin and long parts.
For high-class users, our company has developed high-class PT series deburring machines, which adopt more rigid column structures and are capable to achieve uniform round radius within 0.15mm.
Our company has developed combined deburring machines based on the PT series to efficiently and automatically deburr surfaces with projection or counter bore.
3. Deburring Machines for Fine Blanking Parts.
There are many kinds of fine blanking parts with steel or aluminum materials with multiple requirements: The shape is either flat or bent, the front or back surface has a convex point, or some special parts are required to be chamfered. For the different requirements, we provide the following different types of machines:
Economic deburring machines for fine blanking parts:
This type of the machine is the economic configuration of the deburring machines for fine blanking parts. During the deburring process, the first power head removes the burrs on the flanges of the?? parts, and the second power head removes the sharp edges and forms a uniform radius. Thus, the structure is simple, the efficiency is high, and the operation is easy and convenient; one part can be processed in average 2-3 seconds. This machine meets the requirements of deburring for common fine blanking parts.
Combined Deburring Machines for Fine Blanking Parts
This type of the machine integrates the design of wet deburring and cleaning. The power heads adopt the design of multiple disk brushes and servo lifting control. During the running process, the double power heads work at the same time, yielding higher precision and efficiency than conventional machines. The power heads and the conveying mechanism are especially designed for fine blanking parts, so that the efficiency of the machine can match with the imported high-speed fine-blanking press. In addition, the size of the radius can be quantitatively controlled. This automatic type of machine can be widely applied. It is the first and only machine on the national market, and is going to the international market.? It is another big breakthrough from our research.
本站所有
文案和
新聞均來自互聯網，由
配音云收集整理，版權屬原作者所有，轉載請注明出處。
聯系QQ：327468121??
免責聲明： 以上整理自互聯網，與本站無關。其原創性以及文中陳述文字和內容未經本站證實，對本文以及其中全部或者部分內容、文字的真實性、完整性、及時性本站不作任何保證或承諾，請讀者僅作參考，并請自行核實相關內容。（我們重在分享，尊重原創，如有侵權請聯系在線客服在24小時內刪除）
聯系客服
立即下單
客服-婷婷
客服-薇薇
客服-露露
客服-歐陽
